12 1/4" Tricone Rock Bit, TCI Bit , Rotary Drilling Bit , Friction Bearing Bit
RECOMMENDED DRILLING PARAMETERS FOR APPLICATION
| Types & IADC Code |
417 |
437
447
|
517
527
|
517
527
|
537
547
|
617
627
|
637
|
| WOB |
KN/mm(Bit Dia.) |
0.4~0.9 |
0.4~0.9 |
0.35~1.0 |
0.35~1.0 |
0.5~1.0 |
0.6~1.1 |
0.7~1.2 |
| Lb/in. (Bit Dia.) |
2285~5142 |
2285~5142 |
2000~5714 |
2000~5714 |
2857~5714 |
3428~6285 |
4000~6857 |
| Rotation Speed (Rpm) |
140~60 |
240~70 |
125~50 |
~60 |
110~50 |
100~40 |
80~4 |
Bearing seals
- Roller-cone bearing seals operate in an exceptionally harsh environment. Drilling mud and most cuttings are extremely abrasive. Drilling fluids often contain chemicals, and operating temperatures can be sufficiently high to break down the elastomers from which seals are made. Pressure pulses often occur in downhole drilling fluids that apply lateral loading on seals that must be resisted.
- On a purely practical level, bearing seals have two functions: to prevent foreign materials, such as mud, cuttings, chemicals, and water, from entering the bearings and to prevent bearing lubricant from escaping the bit.
- Visualize the difference in the nature of these two duties. On the interior side, the seal is excluding clean, functional lubricant from escaping the bit, while on the exterior side, the seal is excluding dirt and chemicals from penetrating the bit. The separation of these two extremely different functions takes place at a small point between the two sides of a seal. If either of these functions breaks down, the bearings and the bit could be destined for failure.
Product Tags:
|
|
FA Series Rotary Drill Bit Sealed Friction Bearing With Gauge Protection Images
|
