14 3/4" FSG515G , Rubber Sealed Roller Bearing , Reinforced Gage Protection , TCI Tricone Bit , Tricone Drill Bit
PRODUCT SPECIFICATIONGS
Bit Size : 14 3/4 inch ( 347.4 mm )
IADC : 515
SERIES : FSG
Tooth type : ( TC I) Tungsten Carbide Insert
Connection : 7 5/8 inch API REG PIN
Nozzle Three jet(side) nozzles,
RECOMMENDED DRILLING PARAMETERS FOR APPLICATION
|
Types &
IADC Code
|
415 |
435
445
|
515
525
|
535
545
|
615
625
|
635 |
| WOB |
KN/mm
(Bit Dia.)
|
0.35~0.95 |
0.35~0.95 |
0.4~0.7 |
0.4~0.7 |
0.45~1.1 |
0.5~1.2 |
|
Lb/in.
(Bit Dia.)
|
2000~5428 |
2000~5428 |
2285~4000 |
2285~4000 |
2571~6285 |
2857~6857 |
| Rotation Speed (Rpm) |
150~60 |
150~60 |
140~80 |
120~80 |
110~60 |
100~50
|
The above chart represents commonly available sizes and types, we do produce other sizes and types of rock bits which do not appear on this list. Please contact us for more information.
ROLLER CONE BIT CONE DESIGN
One important factor which affects journal angle is the degree of meshing or interfit (i.e. the distance that the crests of the teeth of one cone extend into the grooves of the other). The amount of interfit affects several aspects of bit design.
1. It allows increased space for tooth depth, more space for bearings and greater cone thickness
2. It allows mechanical cleaning of the grooves, thus helping to prevent bit balling
3. It provides space for one cone to extend across the centre of the hole to prevent coring effects
4. It helps the cutting action of the cones by increasing cone slippage.
Product Tags:
|
|
14 3/4" FSG515G Tungsten Carbide Insert Bit With Rubber Sealed Roller Bearing Images
|
